Brick Paver Installation & Edging



Staging of product

Many paver tasks will vary depending on gain access to, site conditions, job size and of course, the weather. Mindful consideration needs to be taken to determine the time to begin the paver installation.

The supervisor or job supervisor ought to constantly have the materials (sand/ pavers) distributed around the project website for simple and efficient installations. Paver pallets/bundles need to be placed in a way not to hinder the paver installation. The appropriate pallet/bundle placement can make the real project installation simpler and quicker by decreasing the general labor of dealing with the product.

Brick paver patterns

Pavers can be placed in various patterns depending on their shape. Each paver shape will normally have several different hatch patterns that are supplied by the manufacturer.

Professionals require to take into consideration the traffic weight loads on their paver jobs. In the majority of applications worldwide, it has been revealed that pavers laid in a herringbone pattern have actually performed properly.

Pavers that are 60 mm (2 - 3/8 in) density appropriate for pedestrian applications. Pavers that are going to be used in industrial or commercial applications ought to be 80 mm (3 - 1/8 in) in density.

Reference/starting point for brick paver installation

There are a variety of conditions that determine the starting point of a paver job.

When beginning to set up pavers it is best to snap a true straight chalk line on the surface of the bedding sand or pull a true straight string line above the surface area of the bed linen sand at the finished elevation of the pavers This will assist as a guide for keeping straight joint lines and will also permit the installer to make adjustments in the alignment of the pavers.

Buildings and concrete suppressing are generally not straight and must not be utilized for developing straight joint lines. The usage of string lines is essential to identify the real straightness of the edge. As the paver installation advances, the string lines will assist minimize the need for small trim pieces.

These will preserve a minimum joint width and permit the bedding and jointing sand to get in between each paver. Pavers with spacer bars are typically not laid in snug against each other considering that a string line will supply constant joint spacing.

Installation of brick pavers.

One of the most commonly used techniques for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along one of the true straight lines that you have pulled or above the bedding sand. The best method is to place a paver against another one and let it slide down into the bedding sand.

When installing pavers on a high grade, they need to be set up at the base of the grade going uphill. This will avoid the pavers from sneaking as they are being laid.

The best method for setting up pavers on big jobs is to install them mechanically. There are a couple items a professional ought to consider prior to setting up pavers mechanically:

1.) Mechanical installers are just efficient in setting up pavers in specific patterns.

2.) The professional must make sure that the manufacturer can production and bundling pavers in the preferred pattern on the pallets for easy mechanical installation.

Poor color mixing could result in a patchy looking installation. Many producers are constant with color blending on each bundle of pavers, however it is the professional's obligation to ensure proper blending in the field.

Cutting procedures for brick pavers.

Contractors typically have 2 ways of cutting pavers. When cutting pavers damp, it will help decrease dust and will extend the diamond blades life. The operator of the brick saw ought to always cut the pavers away from the surface of the paver field when cutting damp, due to the fact that the pavers will develop a slurry that will stain the paver surface area.

The brick saw operator should constantly wear the proper defense that is needed for running a saw, such as eye, ear, breathing and hand protection ).

Edging types

Edge restraints play a significant role in the overall success of an interlocking pavement installation Edging restraints remove lateral movement of the pavers and hold the pavers securely together. Particularly at the outer border of the paver application, without an edging restraint, your job is ensured to stop working over time.

Generally made edge restraints are the most typically utilized by professionals. Made edging restraints can range from, plastic edging, steel and aluminum, lumbers or precast concrete and stone.

Edging installation.

This might result in the migration of the bedding sand and ultimate lateral motion of the pavers. If there is a possibility of losing bedding sand in between the pavers and the edge restraint, then geo textile material is suggested. When a space between the pavers and the edging surpasses 3/8" (10mm), then the area should be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers have to be compressed. The entire location that is to be compressed ought to be swept tidy of any foreign things and debris that can trigger scuffing or scratching on the surface of the pavers.

In addition, it is essential that the very first compaction takes location before any jointing sand has been applied to the pavers. If jointing sand is used to the pavers prior to compaction takes place, this can cause a bridging issue and will not permit the joints to be entirely filled with jointing sand. This can also prevent the pavers from being appropriately set into the bed linen sand.

When compacting the pavers, it is recommended that you make at least 2 Patio Pavers West Palm Beach passes in various instructions across the pavers. This will permit the pavers to be properly set in the bedding sand and will require the bed linen sand up into the joints from the bottom of the pavers.

The compaction of the pavers is really critical to the final performance of the pavers. Failure to do appropriate compaction can lead to contortions and pavement failure over time.


Paver pallets/bundles ought to be put in a way not to interfere with the paver installation. One of the most extensively used methods for the installation of pavers is hand installation of each paver. The operator of the brick saw ought to constantly cut the pavers away from the surface area of the paver field when cutting damp, due to the reality that the pavers will develop a slurry that will stain the paver surface. Edging restraints eliminate lateral movement of the pavers and hold the pavers firmly together. When a space in between the pavers and the edging goes beyond 3/8" (10mm), then the area needs to be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *